AFUE Ratings Guide

If you’re considering an upgrade to your furnace, one of the first steps is to decide on an efficiency rating. This will impact your up-front costs and what you pay for home heating in the future. Use this guide to learn more about AFUE ratings and how they affect you. 

What Is an AFUE Rating? 

AFUE stands for Annual Fuel Utilization Efficiency. It is a measure of how efficiently a furnace or boiler changes fuel into heat for your home over the course of a year. The higher the AFUE rating (on a scale of 0% to 100%), the more efficient the system is at converting fuel into usable heat. 

How Is AFUE Measured? 

AFUE ratings are measured by calculating the ratio of a furnace’s heat output to the amount of gas or diesel it consumes in the process. This calculation accounts for the energy lost through exhaust gases, radiation and other factors that reduce efficiency. The result is expressed as a percentage, representing the proportion of fuel converted into heat. 

Determining a furnace or boiler’s AFUE rating involves conducting a standard test cycle to measure the heat output and fuel consumption. This test cycle is designed to simulate typical heating conditions in the course of the year, including both on and off periods. The heating system is then run at peak capacity for an extended period to define its peak performance. 

What Is the Minimum AFUE Rating in 2023? 

The U.S. Department of Energy (DOE) has gradually increased HVAC efficiency ratings over the past few decades in an effort to promote energy efficiency and reduce greenhouse gas emissions. In 2023, the minimum rating for new gas furnaces was recalculated to be 81 AFUE. From 2015 to 2022, the South and Southwest regions had a minimum rating of 80 AFUE, and the North required furnaces to be rated 90 AFUE or higher. Better AFUE ratings reduce energy consumption, lowers power bills and reduces the environmental impact of heating your home. 

Why Do Gas Furnaces Jump from 80 to 90 AFUE? 

When shopping for new furnaces, you may find many models around 80 and 90 AFUE, and not a whole lot else to consider. This is because the technology required to exceed 80 AFUE causes a significant jump in performance. 

The 80 AFUE threshold has been the minimum requirement for gas furnaces in the U.S. since the 1990s. At this level, furnaces turn 80% of the fuel they consume into heat, with the remaining 20% forfeited to the atmosphere through the flue. 

Gas furnaces must incorporate more innovative technology to achieve higher AFUE ratings, such as two-stage or modulating gas valves, variable-speed blowers and secondary heat exchangers. These technologies help the furnace pull heat from the fuel source more effectively, boosting efficiency from 80 to 90 AFUE or higher. Today’s best furnaces cap out at around 98.5 AFUE. 

How Do AFUE Ratings Affect Furnace Costs? 

The cost of a furnace with a higher AFUE rating is typically higher than that of a lower AFUE-rated furnace. After all, more innovative technologies come with a higher price tag. The exact cost difference depends on the furnace brand, size and efficiency rating. 

When thinking about the up-front cost of a more efficient furnace, remember the future energy savings that awaits you. The real chance to save money on energy bills for the next decade or longer helps you to recoup the extra up-front investment. 

Should You Buy a Furnace with the Highest AFUE Rating Possible? 

While a higher AFUE rating results in better home heating and lower energy bills, this doesn’t necessarily mean everyone should buy a 95 AFUE furnace. Here are the factors to take into account when comparing costs and efficiency ratings:  

  • Climate: The colder the weather, the more frequently your high-efficiency furnace runs, and the sooner it will provide a return on investment. Therefore, higher AFUE ratings are most beneficial in cold climates that require more heating than cooling to sustain a comfortable indoor temperature. 
  • How long you’ll live in this home: If you picture living in your home for many years, choosing a high-efficiency furnace may be a good investment since it will pay for itself over time in energy savings. However, if you plan to move in the near future, the extra cost of a higher AFUE-rated furnace may not be worth it. 
  • Fuel costs: The affect of an efficient furnace is more pronounced when the price of fuel is higher. You’ll experience noticeable savings when your furnace converts a higher percentage of fuel into usable heat for your home. 

Install a New Furnace Today 

When trying to find the best heating system for your needs and budget, turn to Peachtree Service Experts. We can help you weigh the up-front costs and long-term benefits of different AFUE ratings to guide your decision. We’re so confident you’ll be satisfied with our services that we offer a 100% satisfaction guarantee! For more information or to schedule a free furnace installation estimate, please get in touch with a Service Experts office near you

  • Zoning Systems: Control the Temperature in Every Room

    Central heating and air systems have radically changed home comfort and made it possible to stay completely cozy in any season or climate. But while centralized systems are a handy way to regulate the temperature, they at times fall short when it comes to evenly distributing heated or cooled air... Continue reading

  • Eight Popular Heating Fallacies Debunked

    There are many myths out there about home heating that create confusion and inefficient furnace use. It’s time to clear up these common misconceptions. Here, the heating professionals at Service Experts Heating, Air Conditioning & Plumbing get to the bottom of the eight most common myths to... Continue reading

  • Eight Upgrades to Boost Your Home HVAC System

    During the coldest time of the year in the U.S., there’s no better way to improve your home’s comfort than with some effective upgrades. It’s not just about keeping the house toasty warm as the snow begins to fall—it’s about boosting efficiency and improving the very air you breathe.... Continue reading