Carbon Monoxide and Heat Exchangers

Carbon monoxide, the poisonous, colorless, odorless and tasteless gas responsible for more than 20,000 visits to the emergency room every year, can pose a danger from unanticipated sources in your home, including fireplaces.  

Carbon Monoxide facts

What is a heat exchanger and why is it important? 

A furnace’s heat exchanger is a metal component that transfers heat from the fuel being burned while preventing the air in your home from mixing with the furnace exhaust. Sometimes the heat exchanger fails, either from cracks caused by constant expansion and contraction due to heating and cooling of the metal, or from rust. When a heat exchanger fails—under particular conditions—the exhaust gases, including carbon monoxide, can combine with the air in the house. A properly functioning furnace should not create significant levels of carbon monoxide; however, a cracked or leaking heat exchanger can pose a safety danger. 

What are the dangers connected with a cracked heat exchanger? 

A cracked heat exchanger could let exhaust gas from the furnace to infect the household air with exhaust gases including carbon monoxide. In order for this to happen, the furnace must be giving off high levels of carbon monoxide and the exhaust gas must be joining with the household air. This could lead to serious sickness and even death. 

What are the signs of a cracked heat exchanger? 

Beyond a visual inspection to identify a crack, there are a few warnings of a potential problem with your heat exchanger that you may see. If you turn the heat on and the flames flicker and seem devilish, this could be a indication that circulated air from the furnace is getting into the combustion area and you should have it inspected by an HVAC technician. Although you certainly hope it doesn’t reach this point, other signals of trouble include carbon monoxide detectors sounding and you or your family members feeling sick, lightheaded or nauseous. To ensure the safety of all occupants, all homes should have a working carbon monoxide detector and batteries should be replaced regularly. 

How can I be sure that my heat exchanger really has failed? 

Service Experts’ ACE-certified technicians have received specialized training in diagnosing a cracked heat exchanger. As standard practice and in addition to physically observing the presence of a hole or crack, cameras are used. Whenever possible, the technician will show customers the failed heat exchanger—or at least a photo of it—so they can see for themselves. Additionally, an expert technician will test both the home and furnace for carbon monoxide. A properly operating furnace should not create significant levels of carbon monoxide. The technician will then warn the customers of the dangers associated with the failed part and give professional guidance regarding next steps. 

What happens after an HVAC technician identifies a cracked heat exchanger? 

Once you have a confirmed diagnosis from an expert, your first question will likely be whether the part can be repaired or if replacement is the only option. Unfortunately, the industry standard is that the heat exchanger must be replaced. In fact, the American Gas Association says that any visible crack or hole is reason for requiring replacement of the heat exchanger or furnace. 

Household appliances that release carbon monoxide

If my heat exchanger has failed, do I have to replace the furnace? 

While it may end up making sense to replace the furnace instead of only the heat exchanger, that is not always the case. Furnace warranties can vary—most furnaces have a 10-year warranty on the heat exchanger, while some are covered for 20 years or even for the life of the furnace. Our technicians will help you investigate the warranty on your heat exchanger and provide all the information you need to decide if replacing the heat exchanger or the entire furnace is right for you. 

Stevenson Service Experts recommends changing your carbon monoxide detectors every five years and checking your carbon monoxide detectors every month to make sure the batteries and alarm are working efficiently. And by keeping up with the routine maintenance of your equipment, you will have peace of mind knowing that it’s going to be safe. If you suspect a problem with your heat exchanger or need to have an analysis of carbon monoxide levels in your home, call Stevenson Service Experts today at 614-334-3192 or schedule an appointment online

Tips for keeping the home safe from carbon monoxide