Service Experts technicians

Let Us Help with Your Questions

Heating

  • Homeowners should have maintenance service on their boiler or furnace system at least once a year. This will help prolong the heating system’s life span and lower repairs and utility costs.

  • Heating maintenance is a lot like car maintenance. Preventative furnace maintenance is key to helping your heating system perform as long as possible.

  • Here are a couple steps you can take to keep your family protected from carbon monoxide:

    • Warm up your car out of your garage. Cars are a significant source of carbon monoxide poisoning, so do not leave yours going in the restricted space of a garage. The same is true for gas equipment such as lawn mowers or snowmobiles.
    • Don’t run ovens or grills as heaters. These appliances are safe when used right but can output carbon monoxide when used for an extended period of time in small spaces.
    • Don’t operate a gas generator indoors because it produces fumes.
    • Have your chimney inspected by a specialist. This ensures chimneys and vents aren’t blocked and are connected appropriately.
    • Confirm gas appliances are operating correctly, particularly your heater. You can ensure efficient, safe operation by arranging for routine furnace maintenance with Peachtree Service Experts.
  • Keeping your systems maintained will help lower costs. Visit our helpful in-depth information about keeping your systems healthy. This will tell you about correct maintenance and why it’s crucial.

  • We service and install all popular brands, makes and models. As a large HVAC company, we have quick access to components and units for prompt replacements.

  • Yes. Our Expert technicians are just a short way away, whether you’re in need of a furnace repair in the dark of a cold winter night or an AC replacement in the middle of a heat wave.

  • It’s often less costly to replace your furnace and air conditioner at the same time. Plus, you’ll also enjoy greater energy efficiency year-round. Here’s when you should replace both systems at the same time:

    • Your furnace and air conditioner are more than 15 years old.
    • You want to install a high-efficiency air conditioner soon, which might not be compatible with an older model.
    • You want to improve your energy savings with a smart thermostat, which often don’t work with older heating and cooling equipment.
    • Installation is difficult.
    • You don’t want to have to worry about heating and cooling repairs in the next few years.

    Knowing when to schedule furnace installation can be tough and stressful. Our Experts at Peachtree Service Experts have an A+ in home comfort, so you can count on them to help you with making the right decision. Get started by calling us at 678-235-9699 to request your free home comfort assessment today.

  • We service a few types of heating units, including gas furnaces and heat pumps.

  • We’ll do an in-home consultation, work with you to find the best heating system for your needs, execute the installation and also ensure that the system is working before leaving.

  • We provide financing so homeowners can get the systems they need for an affordable cost.

    We also offer the HVAC Advantage Program, which covers just about everything. You’ll receive an updated heating and cooling system but will not have the hassle of tune-ups. You’ll have a new, high-efficiency system—plus maintenance, repairs and more at no extra cost—for merely one small monthly price.

  • Your house’s air filter should be changed routinely, usually every 1-2 months.

  • Seasonal heating maintenance costs can vary, so please view our Maintenance+ membership page to see detailed tune-up rates.

  • Seasonal maintenance plans are definitely worth the investment for several reasons. Benefits of furnace maintenance plans include automated reminders, no trip charge fees, VIP service and others.

  • If you want to include furnace tune-ups with other important services, look into becoming a member of our Advantage Program™, which can help keep your warranty valid.

  • A popping disturbance is a common sign of an insufficient duct design. This occurs when there’s more airflow than your ductwork can manage.

    Troubles with your ductwork can cause other ventilation and air quality disturbances, such as:

    • Significant noise
    • Greater energy needs
    • Early system malfunction
    • Irregular heating and cooling
    • Broken AC compressor in the summer
    • Too hot furnace or heat pump in the winter
    • Mold growth inside ducts

    Call a qualified company in Atlanta like Peachtree Service Experts to examine your home’s ventilation system. We can offer suggestions for duct repair or installation.

  • It’s common for your heating and cooling equipment to make a little noise. However, hearing odd or loud noises could mean there’s an electrical problem or trouble with the blower fan or capacitor. If not fixed, there can be serious (or expensive) results later on.

  • This could be because of improper thermostat settings. Check that the fan blower is set to “auto” and not “on.” Other reasons include a damaged pilot light, restricted air flow due to dirty or clogged furnace filters, or blocked condensate lines. If issues persist, call Peachtree Service Experts for prompt repair.

  • Most businesses will recommend furnace replacement when the cost to repair your system is more than half the cost of a new system. At times, a repair won’t restore the heating system to a minimally effective level. The lifetime for most furnaces is 15-20 years, and so replacement is generally recommended during that time frame. For more considerations, visit our blog covering more details on when to repair or replace your furnace.

  • It’s often less expensive to replace your furnace and air conditioner at the same time. Plus, you’ll also enjoy greater energy efficiency year-round. Here’s when you should replace both systems at the same time:

    • Your furnace and air conditioner are more than 15 years old.
    • You want to install a high-efficiency air conditioner soon, which possibly might not be compatible with an older model.
    • You want to boost your energy savings with a smart thermostat, which often don’t work with older heating and cooling equipment.
    • Installation is difficult.
    • You don’t want to have to worry about heating and cooling repairs in the next few years.

    Knowing when to schedule furnace installation can be tough and stressful. Our Experts at Peachtree Service Experts have an A+ in home comfort, so you can count on them to help you make the most ideal decision. Get started by calling us at 678-235-9699 to request your free home comfort assessment today.

  • We’ll provide an in-home consultation, work with you to find the best HVAC system for your needs, perform the installation and also ensure that the system is working before leaving.

Cooling

  • Small tasks like replacing the air filter and keeping your equipment clean can go a long way in improving energy efficiency. visit our full guide for cost savings you can earn by keeping your HVAC system healthy.

  • Central air conditioners are ducted HVAC units that draw out heat from your home. There are also heat pump air conditioners, which extract heat with a reversible flow of coolant, as well as ductless mini-splits.

  • The ideal sized air conditioner depends on the size of your home, the local climate and also many other factors. You need to properly size the AC system to ensure maximum energy efficiency.

  • British thermal units are a type of measurement used in air conditioning to illustrate how much energy your AC system needs to absorb heat. If it says 10,000 BTUs, the system is capable of absorbing that much heat each hour.

  • Routine maintenance is extremely beneficial for your air conditioner. While it’s not strictly required, it’s an excellent investment in the energy efficiency and overall performance of your HVAC system. In most cases, having regular maintenance and service also keeps the manufacturer’s warranty valid.

  • Ductless air conditioning doesn’t use air ducts to transport cool air through a building. Instead, indoor air units blow the conditioned air directly into the room or area they’re installed in.

  • SEER means Seasonal Energy Efficiency Ratio, which gauges how effectively your air conditioning is cooling over its busiest season.

  • Heat pumps are very energy efficient, but may start to lose efficiency in seriously cold weather. Check out our guide for figuring out if a heat pump or air conditioner is right for cooling your home.

  • The cost of a/c services depends on the make and model, the severity of the trouble and other factors. For many common repairs, you might expect to pay a few hundred for parts and labor.

  • The cost for AC installation largely depends on the size of the home and the replacement air conditioner unit the homeowner chooses. The installation amount can be well over $12,000, depending on the size of the home and the replacement AC that is chosen for the home. Our Advantage Program helps homeowners get access to the AC systems they need for one low monthly payment.

  • It’s often less expensive to replace your furnace and air conditioner at the same time. Plus, you’ll also enjoy greater energy efficiency year-round. If your units are older than 15 years or you want a high-efficiency model or smart thermostat, you should have a new AC and furnace installed together.

  • We install all types of air conditioning systems, including central air conditioner systems, geothermal, heat pumps and ductless mini-splits. Schedule a quote to find the best fit for your needs by calling Peachtree Service Experts at 678-235-9699.

  • We offer HVAC financing options as well as the HVAC Advantage Program, which covers everything from new units to repairs* and maintenance for an affordale monthly cost.

  • Some of the work during an ac tune-up includes a basic AC maintenance checklist:

    • Tightening electrical connections. This verifies your system is working safely.
    • Lubricating parts. When your system isn’t lubed, friction from moving parts can cause it to stop working more often.
    • Cleaning the condensate drain line. Cleaning this line takes care of mold and clogs, which can cause leaks.
    • Cleaning the condenser coil and evaporator coil. These coils become dirty over time, reducing airflow and its capacity to absorb heat.
    • Straightening coil fins. Aluminum fins on the coils can bend and decrease airflow.
    • Examining system controls. This makes sure your system is starting, running and shutting down properly.
  • There are often various types of maintenance plans and rates. Check out our memberships page to learn about our tiered maintenance memberships.

  • Regular air conditioner maintenance is important to keeping your equipment running efficiently, and it can decrease the need for unanticipated replacements.

  • Some key tells that you need AC maintenance service on your unit is if your home has poor airflow or hot and cold spots, leaks, unusual noises or warm air coming from the vents.

  • Check this full guide to AC maintenance for various things you can do. One of the main things homeowners can do to help upkeep their system, other than having annual yearly or seasonal maintenance done, is to change your AC unit’s air filter every 60-90 days, or 30 days if you have family pets. Changing your filter on a routine basis can prolong the life span of your system by reducing wear and tear on the unit, preventing clogs and improving airflow. Using a higher quality HEPA filter can also help maintain the AC unit’s efficiency and reduce instances of sickness in your home.

  • A trip fee is the expense for the time and travel for a Service Experts team member coming to your home. Look at our offers for printable discounts for your upcoming air conditioner service.

  • Yes. Our pros are just a short trip away to assist with an AC repair or replacement during an emergency.

    • AC leaking water. This is generally the PVC pipe going out of the AC unit. Leaking refrigerant can cause ice to collect on the coils and drip water. AC repair is necessary when this takes place and should be treated as an AC emergency.
    • Air conditioner won’t turn on. Homeowners can first check the thermostat settings and look for a tripped breaker on the electrical panel. If the breaker is tripped, it may not require a repair call.
    • AC not blowing cold air. Double check the thermostat settings are on the correct temperature and that your thermostat has power. Then replace the filter. You can also ensure the AC unit isn’t obstructed with debris, and that it isn’t leaking refrigerant. If you find a leak or your AC is still blowing hot air, call us at 678-235-9699 for emergency AC repair.
    • AC making strange noise. Screeching, banging or clicking sounds coming from your AC could indicate a serious problem. If you’re noticing strange air conditioner noises, shut off your AC and call Peachtree Service Experts for prompt AC repair at 678-235-9699.
  • Most contractors will recommend an AC replacement when the cost to repair your system is more than half the cost of a new system. For more factors to consider, visit our blog covering more details on whether to repair or replace your AC.

  • We service and install all types, including central AC, ductless mini-splits and central heat pumps. (Conditional content: As an effort to promote sustainability practices, we also install geothermal and solar HVAC.)

  • Heat pumps transfer heat in or out of the building instead of creating it. The flow of heat can be reversed, allowing heat pumps to provide both heating and cooling.

  • You can prolong better performance from your heat pump by scheduling service at least once a year. Regular maintenance prolongs your heat pump’s life span and can help reduce repair and utility costs.

  • Maintaining energy-efficient equipment helps bring costs down. Check our helpful in-depth guide about keeping your systems healthy. We’ll tell you all about proper maintenance and a few key benefits.

  • Yes. We’re just a short ways away, whether you need heat pump repair or replacement on a weekend day or in the middle of the night. Give us a call at 678-235-9699 for prompt service.

  • Heat pumps can deliver both heating and cooling, and air-source heat pumps tend to be best suited in mild climates where temps don’t go below 10 degrees Fahrenheit.

  • A heat pump system can replace a heating system in areas where the climate is moderate. Check our more in-depth guide on different heat pump uses in the U.S. Generally, the answer is yes. Because heat pumps transfer hot air rather than generating it from a fuel source, they provide more efficiency than furnaces in most cases, and homeowners can expect 30-40% savings on utility bills when switching.

  • This depends on differing issues that are causing the need for repairs, which our ACE-certified technicians can help diagnose.

  • We install all different kinds of heat pumps systems, such as air-source heat pumps that use central ductwork, ductless mini-split systems and ground-source heat pumps–otherwise known as geothermal heat pumps).

  • Heat pump maintenance is vital for the system to perform efficiently and have a long life span. A heat pump should go through routine maintenance at least once a year. Trust the Experts to handle this with a maintenance membership.

  • Your home’s air filter should be changed routinely, which is usually every one to two months.

  • Seasonal maintenance plans are worth the investment for several reasons. Constant maintenance keeps everything working as seamlessly as possible, which helps lower energy bills while extending your equipment’s life span.

  • HVAC tune-ups can often be covered in most cases under a labor warranty if your system is still under warranty, but we can check to see if tune-ups are covered. Through the Advantage Program™, key services such as heat pump maintenance are included! It’s one of the most thorough HVAC plans around.

  • Many customers pay between $250 and $600 for a heat pump repair, but this is based on what the problem is when the HVAC technician arrives to determine the problem.

  • Heat pumps have a slightly reduced life span than furnaces do as they’re used year-round, but with proper maintenance, many heat pump systems last about 10-15 years.

  • Yes. Our Experts are just a short trip away to help with a heat pump repair or replacement during an emergency.

  • Packaged HVAC units are combination HVAC systems that have an air handler and unit components in one metal cabinet system. This is used to save space in a basement or garage, or on rooftops in multifamily buildings.

  • We install all kinds of packaged HVAC systems, including packaged air conditioners, packaged gas/electric systems, packaged heat pumps and duel-fueled packaged systems. Give Peachtree Service Experts a call to find the ideal one for your home.

Alternative Energy

  • Green energy HVAC focuses on reducing energy consumption and increasing the efficiency of existing HVAC systems in homes not set up for renewable energy options. Properly sized green installations reduce waste and increase output.

  • Some of the most energy-efficient HVAC systems available now are geothermal heat pumps and solar HVAC systems. Call 678-235-9699 today to have a conversation about system replacement if you’re interested.

  • High-efficiency HVAC systems use less energy than a standard HVAC system while providing the same (or better) output. This can save energy and money, and with regular tune-ups and maintenance, the life span of your system can increase. The longer a system is performing efficiently, the better impact we can have for sustainability.

  • There are rebates and incentive programs for certain new system installations in 2023. Peachtree Service Experts can help you navigate discounts and payment for system replacements. We also offer payment options like financing as well as HVAC lease options with our Advantage Program™.

  • Geothermal systems use energy from below ground to provide heating and cooling. They use a “loop” system by moving and delivering from either the ground or a water source in heating mode. In cooling mode, this process works in reverse by extracting heat from indoors to the ground or a water source. The cold air in cooling mode is the result of the process of removing heat and humidity as air is recirculated.

  • Geothermal HVAC can end up saving money long term due to operational savings on utility bills, despite higher initial costs. And they’re more efficient than traditional central heating and cooling systems. You can even secure rebates, tax credits and other federal incentives to lower costs for the installation process.

  • Like other heat pumps, geothermal models don’t generate heat but rely on the Earth’s natural ambient temperature for heating and cooling. You end up reducing your monthly utility bills, and geothermal systems will also usually last longer. If you keep up with routine maintenance, you can get 20 years from a geothermal heat pump and as much as 50+ years for an underground loop system.

  • Yes! Geothermal heat pumps work similiarly to more traditional heat pumps in that they are 2-in-1 systems capable of providing both heating and cooling. Even with this potentially confusing name, geothermal heat pumps are just as effective at cooling homes in different types of climates. In fact, they’re often the most efficient type of system available!

  • A solar system transforms sunlight to electrical energy through either PV (photovoltaic) panels or through mirrors that concentrate solar radiation. PV is used in solar panels, which are the most popular solar energy system. The sun’s light energy is absorbed by PV cells, which stimulates the cells’ electrons and produces electrical energy. When combined with battery storage, the process can even generate backup power for use at night and during outages.

  • Pros:

    • Renewable energy source
    • Smaller energy bills
    • Simpler maintenance needs
    • Incentive programs like state and federal tax credits

    Cons:

    • Upfront installation costs
    • Efficiency depends on weather, making climate/region a factor
  • Solar energy systems are a major investment, but much of these initial costs can be recovered after the equipment has been running for a few years. Batteries without panels can range from $12,000 to $22,000 based on energy storage capacity, while a full install with PV panels can run as much as $35,000. Schedule a quote with our Experts to find out what you need for a solar energy system.

  • Solar energy is perfect for powering compatible HVAC systems on top of other compatible equipment like solar-powered water heaters.

  • The ultimate efficiency of adding solar panels to your home depends on the local climate of where you live. Feel free to give us a call to schedule a quote and start talking about solar energy installation.

  • Your solar Expert can provide more info. It’s worthwhile to research if there are other programs in your state aside from the 30% federal tax credit. Finally, it’s better to have a trusted company like Peachtree Service Experts complete a home energy audit. A thorough audit offers a much clearer idea of how much you could save through solar panel installation once you consider existing utility costs.

  • Sustainable HVAC design is providing HVAC systems to homeowners and building owners with a focus on high-efficiency systems, reaching higher performance, while reducing consumption and energy loss.

  • The most common sustainable HVAC systems are geothermal heat pumps, also called ground source heat pumps or water source heat pumps.

  • High-efficiency HVAC units achieve high performance (heating and cooling output) while using less energy than what was required from older, less efficient models.

  • Green HVAC installation focuses on installing energy-efficient HVAC models and right sizing systems for the home’s requirements to ensure maximum comfort and efficient energy consumption.

  • Geothermal and solar HVAC are the latest sustainable HVAC developments in the industry.

  • Scheduling frequent tune-ups on your HVAC systems can help extend your system’s life span, which is a big step for personal sustainability. Smart thermostats also control the daily temperature of your home and help with zoning, which reduces impact on your systems by not having major temperature changes. Using energy-efficient HVAC systems can also be a big step in making your HVAC eco-friendly. High-efficiency HVAC systems are usually ENERGY STAR certified, which lowers carbon emissions by reaching high performance for less energy.

  • There are rebates and incentives in 2023 for adding energy-efficient HVAC models, like high-efficiency heat pumps. The Department of Energy goes over HVAC efficiency standards and changes the minimum efficiency ratings on models, like SEER rating, AFUE rating and HSPF rating, based on the newest research. This requires manufacturers to match the minimum efficiency ratings in all new models.

Ductwork and Insulation

  • Popping sounds are not unusual if there’s a flaw or damage in your ductwork. The actual sounds appear when there’s more airflow than your ductwork can manage. Trouble with your ductwork can lead to other ventilation and air quality concerns, such as:

    • Frequent or unpleasant noise
    • Greater energy waste
    • Early equipment failure
    • Inconsistent heating and cooling
    • Damage to the AC’s compressor
    • Overheating
    • Mold and mildew growth
  • A whole-home zoning system helps you tweak where heating and cooling is directed. With extra thermostats and dampers installed in the ductwork, each zone’s temperature can be individually controlled.

  • The concentration of indoor pollutants average 3-5 times higher than outdoor air. In fact, EPA studies have found that exposure to contaminants can be 100 times higher indoors compared to outdoors. Allergens, microorganisms and even household cleaners can contribute to contamination and degrade your indoor air quality. You can receive a comprehensive Home Health® Report Card by phoning the air quality specialists at Peachtree Service Experts.

Electrical Services

  • A licensed electrician can do an electrical load calculation to determine the right measurement of service required for a home or business. This calculation takes into consideration the electrical needs of appliances, lighting, and many other electrical devices.

  • A few safety precautions include shutting off the power supply before working on any electrical component, using insulated tools, wearing appropriate personal protective equipment (PPE) and following electrical codes and legal guidelines.

  • It is recommended that electrical service be inspected at the very least every 10 years to confirm that it is safe and up to code.

  • Signs and symptoms of electrical service issues include flickering lights, frequent circuit breaker trips, hot or discolored electrical outlets or switches, buzzing sounds from outlets or switches and burning smells. Another issue is improper outlets in the kitchen or bathroom – which should be GFCI (ground fault circuit interrupter) outlets. This is a shock-resistant outlet that acts as a safety measure and helps prevent fire hazards because water is an excellent conductor of electricity.

  • Efficiency may be improved by using energy-efficient appliances and light bulbs, adding insulation to walls and attics and sealing air leaks.

Indoor Air Quality

  • Indoor air quality refers to pollution in your Atlanta home or business. The concentration of airborne pollutants can be 2–5 times greater than outside. Because most people spend the vast majority of their time inside and breathe roughly 3,000 gallons of air each day (according to the American Lung Association), this can eventually lead to problems.

    Depending on your specific air quality concerns, solutions include:

  • Some of the most prevalent sources of pollutants include Volatile Organic Chemicals (VOCs) such as cleaning or personal care products, fuel-burning utilities and kitchen appliances, and particulate matter like dust, pollen and smoke.

  • Definitely. Pollutants and particulate matter can expose you to illnesses and worsen respiratory conditions, particularly for children and the elderly. For certain contaminants like CO, the effects may even be lethal.

  • Solving indoor air quality concerns can result in a host of benefits to your health and well-being, such as:

    • Reduced risk of illness
    • Fewer or less-extreme asthma/allergy symptoms
    • Relieve sinus irritation or sore throats
    • Healthier, moisturized skin
  • If you find yourself cleaning every day or coughing constantly, your indoor air may be the reason why. According to EPA studies, indoor pollutants can reach concentrations as much as 100 times higher than the air outdoors. You can find out your indoor air quality by scheduling a Home Health® Report consultation with Peachtree Service Experts.

  • Each home has differing comfort needs, especially if someone in your Atlanta home has allergies, asthma or a weak immune system. You may have a need for a single product like a high-efficiency air filtration system, or multiple. Peachtree Service Experts can aid you in identifying the right combination of equipment.

  • No. HVAC air filters are different in quality and design, and some have exclusive features. We generally advise using the filter your HVAC manufacturer recommends pairing with your system. All filters are assigned MERV ratings on a scale from 1–20. MERV is short for Minimum Efficiency Reporting Value and can help you identify high-efficiency filters. In most homes, a MERV rating of 11 or lower will suffice.

  • The optimal schedule for cleaning or replacing your air filter depends on multiple factors, like the filter design and MERV rating as well as the current indoor air quality. For common 1”-3” filters, most brands recommend replacement every 30-90 days. Pets, health conditions and even nearby pollution sources can encourage replacing the filter more often.

    • A 1″ pleated air filter must be replaced every 30-60 days.
    • A 2″ pleated air filter should be changed out every 3 months.
    • A 3” pleated air filter should be changed every 120 days.
    • A 4″ pleated air filter should be exchanged every 6 months.
    • A 5” or 6″ pleated air filter ought to be replaced every 9-12 months.
  • Assuming the condition is not your body’s hydration, very dry air can irritate your throat and sinuses. Consider getting a whole-home humidifier if you consistently struggle with a dry, itchy throat.

  • Your HVAC system removes moisture as it runs, leading to situations where humidity levels fall out of balance. Portable humidifiers can resolve humidity concerns in a single room or small area, but a central humidifier ensures balanced humidity throughout the whole home.

  • For many, comfortable humidity levels are between 30-60%. These levels are particularly hard to maintain in the winter, as cold air does not hold onto moisture as well as warm air. What’s more, your furnace displaces moisture by generating hot, dry heat.

  • The wisest way to find an appropriate whole-house humidifier is multiplying the total square footage by the height of the ceiling. This will help determine how much water will be needed to balance the humidity in that room.

    You should also consider your available budget, as a humidifier needs maintenance just like any other mechanical equipment.

  • It depends on the model, but whole-house humidifiers average between 1.5 to 12 gallons per day. As you can imagine, dry climates will use more water to keep humidity stable.

  • Routine preventive maintenance is often crucial for long-term equipment efficiency, and your humidifier is no exception. The humidifier’s reservoir should be frequently drained and cleaned to prevent mold.

  • Carbon monoxide (CO) is a colorless, odorless and tasteless gas released by partial fuel combustionwhich, in turn is frequently caused by inadequate access to oxygen. Appliances relying on natural gas, charcoal, wood or kerosene are common sources of CO gas, usually if they are not running correctly or have been installed incorrectly. CO is poisonous to the body and is lethal at high levels or extended exposure.

  • Initial signs such as nausea and fatigue are often incorrectly recognized as a result of the flu. But CO gas exposure can progress, oftentimes leading to confusion, organ damage or even death. Other symptoms include:

    • Headaches
    • Dizziness
    • Chest pain
    • Vomiting
  • Yes. Eliminating carbon monoxide should be a key concern because of the jeopardy it poses to your health and well-being. CO gas can be found in any Atlanta home or commercial property, making safe ventilation and prevention techniques universally beneficial.

  • Prevention is the optimum place to start. A few safety precautions to take include:

    • Don’t let your car idle in the garage. Cars are a significant source of carbon monoxide poisoning, so do not leave yours going in the confined space of a closed garage. The same holds true for gas equipment such as lawn mowers or snowmobiles.
    • Don’t use ovens or grills as methods for heating your home. These appliances are safe when used correctly but can make carbon monoxide when used for an extended period in small spaces.
    • Never operate a gas generator indoors. The fumes will have a much harder time dissipating.
    • Have your chimney checked by a specialist. This ensures chimneys and vents aren’t blocked and are connected appropriately.
    • Confirm gas appliances are operating correctly, particularly your heater. You can ensure efficient, safe operation by arranging routine furnace maintenance with Peachtree Service Experts.

    If carbon monoxide has been detected, you should immediately vacate the building and alert the fire department and utility provider. If a leak is discovered, you should then contact a trusted HVAC company for repairs.

  • Given that carbon monoxide is colorless, odorless and lethal in heavy concentrations, installing carbon monoxide detectors in central locations is the best way to alert you to its presence.

    A carbon monoxide detector is comparable to a smoke alarm, monitoring the air and notifying you if carbon monoxide levels are too high. If possible, you need to have at least one detector near every bedroom on all floors in your home. Extra detectors can be placed near the kitchen, living areas or near combustion appliances. These detectors are best used in combination with our HVAC maintenance memberships, which keep your device in good shape and may help you prevent carbon monoxide.

  • If an air freshener isn’t doing the trick, there may be microbes or contaminants nearby producing the unpleasant odor. Bacteria and mold are common sources, but they can be treated with the sanitation properties of a germicidal UV light. They are particularly effective against odor-producing microorganisms.

Plumbing

  • If you notice your supply of hot water isn’t lasting long, it may be an issue with your tank hot water heater. The heating element will sometimes accumulate too much grime and mineral buildup.

  • A toilet that’s running constantly could be dealing with any number of issues, including a broken flapper seal, flush valve or flapper chain. Sometimes it’s the handle itself that’s making the toilet run. A running toilet wastes a lot of water, so don’t hesitate to contact our plumbers at 678-235-9699.

  • One of the most common reasons your dishwasher isn’t draining correctly is because the drain line is clogged. The line, also called a drain hose, removes water from the dishwasher tub at the end of a cycle. If the drain line is clogged, water may not be able to flow properly. Contact our certified plumbers for troubleshooting and repairs.

  • A prompt response is important if you’re dealing with a burst pipe because it froze. Expert plumbers are better equipped to resolve burst pipe repairs, but there are several things you can do by yourself to keep the pipes from icing over in the first place:

    • Open kitchen and bathroom cabinet doors to enable warmer air to circulate around the plumbing. Be sure to move any harmful cleaners and household chemicals up out of the reach of children.
    • Let the cold water drip from faucets served by exposed pipes. Running water through the pipe—even at a trickle—helps prevent ice from forming and freezing.
    • Minimize changes to the thermostat and keep your home at least 50 degrees, even when you’re not home.
    • Explore the full guide for dealing with frozen pipes.
  • Dump food scraps right away with cold water and leave the disposal on for about 30 seconds to avoid a clog forming. You should also avoid dumping coffee grounds, eggshells, potato peels and other large pieces of food into the disposal, because they lead to drainage issues and bad smells.

  • Backflow and the subsequent cross connection can happen wherever your nonpotable plumbing system meets the water lines. As such, many different types of fixtures and appliances are at risk, including:

    • Sprinklers
    • Washing machines
    • Kitchen and bathroom faucets
    • Bathtubs and showers
    • Toilets
    • And more

    For commercial properties like industrial facilities, equipment such as boilers, chemical mixing tanks and laboratory equipment are vulnerable to backflow, etc.

  • Backflow preventers stop contaminants from entering the public water supply and posing a health risk to the community. Backflow prevention is vital because it helps to ensure that the municipal water supply remains safe and free from contaminants.

  • There are several types of backflow preventers, including:

    • Reduced pressure zone (RPZ) valves
    • Double check valves
    • Pressure vacuum breaker valves

    The type of backflow preventer you may need depends on your property’s plumbing system and also the most common contaminants the plumbing is vulnerable to. Quality backflow prevention services should always help determine the most appropriate make and model for your needs.

  • Your home may have an RPZ or Reduced Pressure Zone. The zone’s consistent pressure serves as a backflow prevention device to prevent contaminants from flowing backward. At Peachtree Service Experts, our certified testers focus on:

    • Annual backflow RPZ testing
    • RPZ inspections
    • Backflow prevention device installation and maintenance

    Since preventing trouble is always easier than repairing it, you should make an attempt to have your RPZ valve inspected every year as recommended.

  • Backflow preventers commonly need to be tested annually to ensure that they are functioning correctly, although the ultimate maintenance needs depend on the type of backflow preventer you have and its current condition.

  • Backflow preventers are complicated technical devices, meaning installation is best left to a professional with the right tools and experience. Our backflow prevention specialists will ensure that the device is installed correctly and meets all appropriate regulations and standards.

  • Costs depend on many factors. You should consider the type of backflow preventer you need and the complexity of your property’s plumbing system as well as the cost of any needed parts and labor. Call us at 678-235-9699 for a free quote.

  • There are a few signs that may indicate that your backflow preventer is not working correctly including:

    • Leaks
    • A large, sudden change in water pressure.
    • Unusual sounds coming from the prevention device.

    If you notice any of these signs, it is important to contact a professional backflow prevention service provider as soon as possible.

  • Without having a backflow prevention device, the backflow may contaminate your supply of potable water. This contamination could also enter the public water supply, posing a risk for the entire community. This can leave you open to health or legal consequences depending on the significance of the situation.

  • The regulations and codes that require backflow prevention systems vary by jurisdiction. In some areas, they are required by law for certain types of plumbing systems or for plumbing made to handle specific contaminants. A specialized backflow prevention service provider can help review any applicable regulations for your plumbing system.

  • Our faucet repair and installation in Atlanta are outstanding plumbing services to locate, diagnose and resolve whatever problem is plaguing your faucets. We can repair a wide range of models as well as provide seamless new or replacement installation. If you don’t know what to choose, your plumber can recommend the right faucet for the job.

  • Yes! We work with quality installers that can seamlessly install plumbing fixtures like a bathtub or new showerhead.

  • To get rid of the risk of your garbage disposal smelling, food scraps should be ground up right away with cool water. Thirty seconds is more than enough time. Avoid pouring coffee grounds, eggshells, potato peels and banana peels into your disposal, because they frequently cause drainage issues and unpleasant smells. While bleach can seem like a good idea for cleaning your garbage disposal, it hardens grease and other food residue in your pipes, producing clogs.

    Our plumbing Experts advise using these cleaning solutions each week to keep your disposal smelling fresh:

    • Hot water and baking soda
    • Hot water and dish soap
    • Hot water and vinegar

    You can also buy garbage disposal pods or grind up citrus peels to help clear out odors. If your garbage disposal still smells, you might be dealing with a leak (especially if the smell resembles a sewer). Contact us at for Expert plumbing service.

  • If you call us for leak detection in Atlanta, our plumbers set out to thoroughly review your plumbing system for signs of a leak. Whether they’re under the kitchen sink or right at the water main, every leak we find will be fully repaired.

  • Yes! If you’re dealing with an emergency plumbing problem, we can respond quickly and begin repairs just as fast.

  • If you believe you have a leak but aren’t entirely certain, check your water meter:

    • Make sure no water is being used inside or outside your home.
    • Check the leak indicator on your water meter. The indicator is commonly a triangular dial or miniature silver wheel. If the dial is spinning, you probably have a leak.

    We’ll track the leak back to its source and get it repaired before you spend more money or potentially damage your home.

  • With all the locations water is used in your home, there are a lot of areas you could uncover a leak.

    Leaks can be triggered by a variety of plumbing issues. They are usually spotted:

    • On water supply lines and connections underneath a sink
    • In washing machines, namely old, inefficient units
    • In hot- and cold-water hoses linked to your washing machine

    After you verify the presence of a leak, we can help. We back all of our work with a 100% Satisfaction Guarantee for a year.*

  • Overall costs may vary depending on where the leak is in your home in addition to the severity of any damage. A minor, dripping leak can be fixed more easily compared to severe damage to the water main.

  • It may be difficult to prevent leaks entirely, but you do have options for minimizing risk. Seals and valves can frequently lead to leaks, so performing routine maintenance can minimize the risk. Investing in professional repair and repiping will also ensure the entire system is as tightly sealed as possible.

  • Yes! When there’s a plumbing emergency, we can respond promptly and find the root cause.

  • A water line delivers fresh water into the home, while a sewer line deposits wastewater away from the home.

  • Signs of a leak in a water line could be low water pressure, higher water bills, and damp or mushy areas outdoors. Signs of a leak in a sewer line could be slow drains, sewage backups and unpleasant odors.

  • A clog can form in the water line as a result of mineral buildup, rust or debris. Clogs in sewer lines are usually because of grease, hair or other debris.

  • You might have to replace the water lines if the pipes are severely corroded, have frequent leaks or are made of outdated materials.

  • Signs of a sewer line backup could be slower drains, sewage backups and foul odors.

  • When something happens to your water or sewer lines, you should contact our Expert plumbers at 678-235-9699 at the earliest opportunity.

  • The cost to repair or replace water lines or sewer lines can vary widely depending on the extent of the damage and the materials used. Our technicians can help discuss repair or replacement costs once we’ve finished the initial diagnostic visit.

  • In some cases, it may be possible to repair water lines or sewer lines using trenchless technology, minimizing digging and subsequent yard damage.

  • A few things to keep in mind to protect your plumbing includes being mindful of what you flush or pour down drains, avoiding tree roots near sewer lines, and keeping the lines inspected and cleaned on a regular basis.

  • If a water line or sewer line issue is not fixed, it could result in further problems including costly repairs, water damage and even possible health hazards.